Circular Saws » Solid Wood

Circular sawblades for solid wood Longitudinal ripping cuts down the grain

Quick Overview

(RP) Rip Cut, for ripping soft and hard woods when surface finish is not important, feed speeds can be high due to large gullet area and hook angles. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Ripping cuts down the grain of soft and hard dry wood
Material To Cut
Solid wood
Machine Type
Table saw, trim saw, multi-rip saw
Feed System
MAN / MEC
Saw Design
Large gullets and hook angle for high feed
Tooth Shape
Flat top or alternate bevel

Circular sawblades for solid wood Longitudinal ripping cuts down the grain, anti-kick

Quick Overview

(AK) Anti-Kick, For ripping down the grain of timber when using manually fed machines requiring chip-limitation.. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Longitudinal cuts
Material To Cut
Solid dry wood
Machine Type
Sizing saw
Feed System
MAN / MEC
Saw Design
Chip limited to prevent kick back
Tooth Shape
Flat top

Circular sawblades for solid wood General cross cut

Quick Overview

(GX) General Cross Cut, for general cross cutting of soft and hard woods. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Cross cut and planing cut
Material To Cut
Solid wood, plywood, chipboard and veneer packs
Machine Type
Sizing saw
Feed System
MAN / MEC
Saw Design
Standard
Tooth Shape
Alternate bevel

Circular sawblades for solid wood Negative cross cut

Quick Overview

Negative Cross Cut, gives a superior finish on radial arm and pull over cross cut saws. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Cross cutting with the saw above the wood
Material To Cut
Solid wood
Machine Type
Pull over cross cut, pendulum saw and radial arm cut off saw
Feed System
MAN / MEC
Saw Design
Negative hook angle to reduce grabbing
Tooth Shape
Alternate bevel

Circular sawblades for universal trimming and sizing, Fine cross cutting in solid wood

Quick Overview

Fine Cross Cut, Designed for chip free cutting for joinery, cabinet and picture frame manufacture. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Longitudinal and cross cutting in thin panel material
Material To Cut
Solid wood, wooden panels and plastic panels
Machine Type
Sliding table sizing saw with or without scorer
Feed System
MAN / MEC
Tooth Shape
Alternate bevel or triple-chip

Circular Plate Saws Spring set plate saws

Quick Overview

(CP) Circular Plate Saws, traditional spring set and sharpened steel plate, which can be machine sharpened or sharpened with a file. Often used in Africa but also common on farm machinery for hedge cutting or firewood machines.
Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Cutting down or across the grain of soft and hard dry wood
Material To Cut
Solid wood
Machine Type
Table saw, bench saw, rack bench
Feed System
MAN / MEC
Saw Design
Spring set, high carbon steel plate saw (Not Tungsten Tipped)
Tooth Shape
10 to 25 degree hook for rip and 0 to -30 degree for cross cut, standard or peg shape

Circular sawblades for construction saws

Quick Overview

(NB) Nail Buster, tough carbide for use on building and construction sites for ripping and cross cutting panel boards and reclaimed timber with foreign bodies such as nails and cement. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Ripping and cross cutting on construction saws
Material To Cut
Solid wood with nails, panel boards and shuttering material with cement
Machine Type
Construction saw
Feed System
MAN / MEC
Saw Design
Strong tooth for manual feed and tough carbide
Tooth Shape
Triple-chip every tooth

Kikukawa Saws

Quick Overview

(KK) Kikukawa, special saw blades with collars fitted and cut in half for use on a Kikukawa machine. Other diameters, pitches and kerf widths can be manufactured to suit any special requirements.

Application
Cutting down the grain of soft and hard dry wood and panels
Material To Cut
Solid wood and panels
Machine Type
Multi-rip Kikukawa machine
Feed System
MAN / MEC
Saw Design
Collars fitted and cut in half
Tooth Shape
Alternate bevel or triple-chip